TP-Link T2600G-18TSTL-SG3216 T2600G-18TSUN V1 Configuration Guide - Page 579

Configuring DHCP DHCP Server Configuration Step 9 Step 10 Step 11 Step 12 Step 13 Step 14 next-server ip-address (Optional) Specify the IP address of a TFTP server for the clients. If needed, the clients can get the configuration file from the TFTP server for auto installation. ip-address: Specify the IP address of theTFTP server. domain-name domainname (Optional) Specify the domain name that the clients should use when resolving host names via DNS. domainname: Specify the domain name. bootfile file-name (Optional) Specify the name of the bootfile. If needed, the clients can get the bootfile from the TFTP server for auto installation. file-name: Specify the bootfile name. show ip dhcp server pool Verify the configuration of the DHCP server pool. end Return to Privileged EXEC Mode. copy running-config startup-config Save the settings in the configuration file. The following example shows how to create a DHCP server pool and name it as pool1 and configure its network address as 192.168.1.0, subnet mask as 255.255.255.0, lease time as 180 minute, default gateway as 192.168.1.1, DNS server as 192.168.1.4, Netbios server as 192.168.1.19, Netbios type as broadcast, TFTP server as 192.168.1.30, domain name as com, and bootfile name as bootfile: Switch#configure Switch(config)#ip dhcp server pool pool1 Switch(dhcp-config)#network 192.168.1.0 255.255.255.0 Switch(dhcp-config)#lease 180 Switch(dhcp-config)#default-gateway 192.168.1.1 Switch(dhcp-config)#dns-server 192.168.1.4 Switch(dhcp-config)#netbios-name-server 192.168.1.19 Switch(dhcp-config)#netbios-node-type b-node Switch(dhcp-config)#next server 192.168.1.30 Switch(dhcp-config)#domain-name com Switch(dhcp-config)#bootfile bootfile Configuration Guide 549