TP-Link T2600G-18TSTL-SG3216 T2600G-18TSUN V1 Configuration Guide - Page 960

Configuring SNMP & RMON SNMP Configurations 2.2.4 Creating SNMP Users Configure users of the SNMP group. Users belong to the group, and use the same security level and access rights as the group. Step 1 Step 2 Step 3 Step 4 Step 5 configure Enter global configuration mode. snmp-server user name { local | remote } group-name [ smode { v1 | v2c | v3 }] [ slev { noAuthNoPriv | authNoPriv | authPriv }] [ cmode { none | MD5 | SHA }] [ cpwd confirm-pwd ] [ emode { none | DES }] [ epwd encrypt-pwd ] Configure users of the SNMP group. name : Enter the user name with 1 to 16 characters. local | remote : Choose a user type. Local indicates that the user is connected to a local SNMP engine, while remote means that the user is connected to a remote SNMP engine. group-name : Enter the name of the group which the user belongs to. The group is determined by the group name, security mode and security level. v1 | v2c | v3 : Choose a security mode for the SNMP group from the following: SNMPv1, SNMPv2c, SNMPv3. noAuthNoPriv | authNoPriv | authPriv : For SNMPv3 groups, choose a security level from noAuthNoPriv (no authorization and no encryption), authNoPriv (authorization and no encryption), authPriv (authorization and encryption). The defaut is noAuthNoPriv. Please note that if you have chosen v1 or v2c as the security mode, security level cannot be configured. none | MD5 | SHA : Choose an authentication algorithm which is only for the user of SNMPv3. SHA authentication mode has a higher security than MD5 mode. By default, the Authentication Mode is none. confirm-pwd : Enter an authentication password with 1 to 16 characters excluding question mark and space. This password in the configuration file will be displayed in the symmetric encrypted form. none | DES : Choose a privacy mode which is only for the user of SNMPv3. None indicates no privacy method is used, and DES indicates DES encryption method is used. By default, the Privacy Mode is none. Please note that if you have chosen v1 or v2c as the security mode, the privacy mode cannot be configured. encrypt-pwd : Enter a privacy password with 1 to 16 characters excluding question mark and space. This password in the configuration file will be displayed in the symmetric encrypted form. show snmp-server user Displays the information of SNMP users. end Return to privileged EXEC mode. copy running-config startup-config Save the settings in the configuration file. The following example shows how to create an SNMP user on the switch. Name the user as admin, and set the user as a remote user, SNMPv3 as the security mode, authPriv as the Configuration Guide 930