TP-Link T2600G-18TSTL-SG3216 T2600G-18TSUN V1 Configuration Guide - Page 959

Configuring SNMP & RMON SNMP Configurations Step 2 Step 3 Step 4 Step 5 snmp-server group name [ smode {v1 | v2c | v3}] [ slev {noAuthNoPriv | authNoPriv | authPriv}] [ read read-view ] [ write write-view ] [ notify notify-view ] Set an SNMP group. name : Enter the group name with 1 to 16 characters. The identifier of a group consists of a group name, security model and security level. Groups of the same identifier are recognized as being in the same group. v1 | v2c | v3 : Choose a security mode for the SNMP group from the following: SNMPv1, SNMPv2c, SNMPv3. The default is v1. noAuthNoPriv | authNoPriv | authPriv : For groups of SNMPv3, choose a security level among noAuthNoPriv (no authorization and no encryption), authNoPriv (authorization and no encryption), authPriv (authorization and encryption). The default is noAuthNoPriv. Please note that if you have chosen v1 or v2c as the security mode, the security level cannot be configured. read-view : Set the view as read-only. And then the NMS can view parameters of the specified view. write-view : Set the view as write-only. And then the NMS can modify parameters of the specified view. Please note that the view in write-view should also be in read-view. notify-view : Set the view as notify-only view. And then the NMS can get notifications of the specified view from the agent. show snmp-server group Displays SNMP group entries. end Return to Privileged EXEC Mode. copy running-config startup-config Save the settings in the configuration file. The following example shows how to create an SNMPv3 group. Name the group as nmsmonitor, enable Auth Mode and Privacy Mode, and set the view as read View and notify View: Switch#configure Switch(config)#snmp-server group nms-monitor smode v3 slev authPriv read View notify View Switch(config)#show snmp-server group No. Name Sec-Mode Sec-Lev Read-View Write-View Notify-View 1 nms-monitor v3 authPriv View View Switch(config)#end Switch#copy running-config startup-config Configuration Guide 929