TP-Link T2600G-18TSTL-SG3216 T2600G-18TSUN V1 Configuration Guide - Page 92

Managing System Access Security Configurations SSL Version 3 Select Enable to make the switch support SSL Version 3 protocol. SSL is a transport protocol. It can provide server authentication, encryption and message integrity to allow secure HTTP connection. TLS Version 1 Select Enable to make the switch support TLS Version 1 protocol. TLS is a transport protocol upgraded from SSL. It supports a different encryption algorithm from SSL, so TLS and SSL are not compatible. TLS can support a more secure connection. 2) In the CipherSuite Config section, select the algorithm to be enabled and click Apply. RSA_WITH_ RC4_128_MD5 Key exchange with RC4 128-bit encryption and MD5 for message digest. RSA_WITH_ RC4_128_SHA Key exchange with RC4 128-bit encryption and SHA for message digest. RSA_WITH_ DES_CBC_SHA Key exchange with DES-CBC for message encryption and SHA for message digest. RSA_ WITH_3DES_ EDE_CBC_SHA Key exchange with 3DES and DES-EDE3-CBC for message encryption and SHA for message digest. 3) In the Session Config section, specify the Session Timeout and click Apply. Session Timeout The system will log out automatically if users do nothing within the Session Timeout time. 4) In the Access User Number section, select Enable and specify the parameters. Click Apply. Number Control Select Enable to control the number of the users logging in to the web management page at the same time. Admin Number Specify the maximum number of users whose access level is Admin. Guest Number Specify the maximum number of users whose access level is Operator, Power User or User. Note: For T2600-18TS, the number of Operator, Power User and User can be set respectively. 5) In the Certificate Download and Key Download section, download the certificate and key. Certificate File Select the desired certificate to download to the switch. The certificate must be BASE64 encoded. The SSL certificate and key downloaded must match each other, otherwise the HTTPS connection will not work. Configuration Guide 62