TP-Link T2600G-18TSTL-SG3216 T2600G-18TSUN V1 Configuration Guide - Page 834

Configuring Network Security AAA Configuration Console default default Telnet default default Ssh default default Http Login1 Enable1 Switch(config)#end Switch#copy running-config startup-config 12.2.6 Configuring Login Account and Enable Password The login account and Enable password can be configured locally on the switch or centrally on the RADIUS/TACACS+ server(s).  On the Switch The local username and password for login can be configured in the User Management feature. For details, refer to Managing System. To configure the local Enable password for getting administrative privileges, follow these steps: Step 1 configure Enter global configuration mode. Step 2 enable admin password { [ 0 ] password | 7 encrypted-password } Set the Enable password. This command uses symmetric encryption. 0 and 7 represent the encryption type. 0 indicates that an unencrypted key will follow. 7 indicates that a symmetric encrypted key with a fixed length will follow. By default, the encryption type is 0. password is a string from 1 to 31 alphanumeric characters or symbols. encrypted-password is a symmetric encrypted key with a fixed length, which you can copy from the configuration file of another switch. The key or encrypted-key you configured here will be displayed in the encrypted form. Step 3 enable admin secret { [ 0 ] password | 5 encrypted-password } Set the Enable password. This command uses MD5 encryption. 0 and 5 are the encryption type. 0 indicates that an unencrypted key will follow. 5 indicates that an MD5 encrypted password with fixed length will follow. By default, the encryption type is 0. password is a string from 1 to 31 alphanumeric characters or symbols. encryptedpassword is an MD5 encrypted password with fixed length, which you can copy from another switch's configuration file. end Return to privileged EXEC mode. Configuration Guide 804