TP-Link T2600G-18TSTL-SG3216 T2600G-18TSUN V1 Configuration Guide - Page 41

Accessing the Switch Command Line Interface Access 3 Command Line Interface Access Users can access the switch's command line interface through the console (only for switch with console port), Telnet or SSH connection, and manage the switch with the command lines. Console connection requires the host PC connecting to the switch's console port directly, while Telnet and SSH connection support both local and remote access. The following table shows the typical applications used in the CLI access. Table 3-1 Method list Method Using Port Typical Applications Console Console port (connected Hyper Terminal directly) Telnet RJ-45 port CMD SSH RJ-45 port Putty 3.1 Console Login (only for switch with console port) Follow these steps to log in to the switch via the Console port: 1) Connect the PC or terminal to the Console port on the switch with the serial cable. 2) Start the terminal emulation program (such as the Hyper Terminal) on the PC and configure the terminal emulation program as follows:  Baud Rate: 38400bps  Data Bits: 8  Parity: None  Stop Bits: 1  Flow Control: None 3) Press Enter in the main window and Switch> will appear, indicating that you have successfully logged in to the switch and you can use the CLI now. Configuration Guide 11