TP-Link T2600G-18TSTL-SG3216 T2600G-18TSUN V1 Configuration Guide - Page 540

Configuring Logical Interfaces Logical Interfaces Configurations IP Address Mode Specify the IP address assignment mode of the interface. None: No IP address will be assigned. Static: Assign an IP address manually. DHCP: Assign an IP address through DHCP . BOOTP: Assign an IP address through BOOTP. IP Address Specify the IP address of the interface if you choose "Static" as the IP address assignment mode. Subnet Mask Specify the subnet mask of the interface's IP address. Admin Status Enable or disable the interface's Layer 3 capabilities. Interface Name (Optional) Enter the name of the interface. 2) In the Interface List section, you can view the corresponding interface entry you create. 2.1.2 Configuring IPv4 Parameters of the Interface In Figure 2-1 you can view the corresponding interface entry you create in the Interface List section. On the corresponding interface entry, click Edit to load the following page and configure the IPv4 parameters of the interface. Figure 2-2 Configuring the IPv4 Parameters 1) In the Modify Interface section, specify an interface ID and configure relevant parameters for the interface according to your actual needs. Then click Apply. Interface ID Select an interface type and enter the ID of the interface. Configuration Guide 510