TP-Link T2600G-18TSTL-SG3216 T2600G-18TSUN V1 Configuration Guide - Page 758

Configuring Network Security IP-MAC Binding Configurations Source Select the source of the entry and click Search. All: Displays the entries from all sources. Manual: Displays the manually bound entries. Scanning: Displays the binding entries learned from ARP Scanning. Snooping: Displays the binding entries learned from DHCP Snooping. IP: Enter an IP address and click Search to search the specific entry. In the Binding Table section, you can view the searched entries. Additionally, you can configure the host name and protect type for one or more entries, and click Apply. Host Name Enter a host name for identification. IP Address Displays the IP address. MAC Address Displays the MAC address. VLAN ID Displays the VLAN ID. Port Displays the port number. Protect Type Select the protect type for the entry: None: This entry will not be applied to any feature. ARP Detection: This entry will be applied to the ARP Detection feature. IP Source Guard: This entry will be applied to the IP Source Guard feature. All: This entry will be applied to both the features. Source Displays the source of the entry. Collision Displays the collision status of the entry. Warning: The collision entries have the same IP address and MAC address, and all the collision entries are valid. This kind of collision may be caused by the MSTP function. Critical: The collision entries have the same IP address but different MAC addresses. For the collision entries learned from the same source, only the newly added entry will be valid. For the collision entries learned form different sources, only the entry with the highest priority will be valid. The priority of different entry types, from high to low, is Manually, ARP Scanning and DHCP Snooping. 2.2 Using the CLI Binding entries via ARP scanning is not supported by the CLI; Binding entries via DHCP Snooping is introduced in DHCP Snooping Configurations. The following sections introduce how to bind entries manually and view the binding entries. Configuration Guide 728