TP-Link T2600G-18TSTL-SG3216 T2600G-18TSUN V1 Configuration Guide - Page 43

Accessing the Switch Command Line Interface Access 3.2 Telnet Login The switch supports Login Local Mode for authentication by default. Login Local Mode: Username and password are required, which are both admin by default. The following steps show how to manage the switch via the Login Local Mode: 1) Make sure the switch and the PC are in the same LAN (Local Area Network). Click Start and type in cmd in the Search bar and press Enter. Figure 3-3 Open the cmd Window 2) Type in telnet 192.168.0.1 in the cmd window and press Enter. Figure 3-4 Log In to the Switch 3) Type in the login username and password (both admin by default). Press Enter and you will enter User EXEC Mode. Figure 3-5 Enter User EXEC Mode 4) Type in enable command and you will enter Privileged EXEC Mode. By default no password is needed. Later you can set a password for users who want to access the Privileged EXEC Mode. Configuration Guide 13