TP-Link T2600G-18TSTL-SG3216 T2600G-18TSUN V1 Configuration Guide - Page 177

Managing MAC Address Table Security Configurations Now you have configured MAC notification traps. To receive notifications, you need to further enable SNMP and set a management host. For detailed SNMP configurations, please refer to Configuring SNMP & RMON. The following example shows how to enable new-MAC-learned trap on port 1, and set the interval time as 10 seconds. After you have further configured SNMP, the switch will bundle notifications of new addresses in every 10 seconds and send to the management host. Switch#configure Switch(config)#mac address-table notification global-status enable Switch(config)#mac address-table notification interval 10 Switch(config)#interface gigabitEthernet 1/0/1 Switch(config-if)#mac address-table notification new-mac-learned enable Switch(config-if)#show mac address-table notification interface gigabitEthernet 1/0/1 Mac Notification Global Config Notification Global Status : enable Table Full Notification Status: disable Notification Interval : 10 Port LrnMode Change Exceed Max Limit New Mac Learned ---- Gi1/0/1 disable disable enable Switch(config-if)#end Switch#copy running-config startup-config 3.2.2 Limiting the Number of MAC Addresses in VLANs Follow these steps to limit the number of MAC addresses in VLANs: Step 1 configure Enter global configuration mode. Configuration Guide 147