TP-Link T2600G-18TSTL-SG3216 T2600G-18TSUN V1 Configuration Guide - Page 581

Configuring DHCP DHCP Server Configuration Step 3 Bind an IP address to a client: address ip-address client-identifier client-id Bind the specified IP address to the client with a specific hexadecimal client ID. ip-address: Specify the IP address to be bound. client-id: Specify the client ID in hexadecimal format. address ip-address client-identifier client-id ascii Bind the specified IP address to the client with a specific ASCII client ID. ip-address: Specify the IP address to be bound. client-id: Specify the client ID with ASCII characters. Step 4 Step 5 Step 6 address ip-address hardware-address hardware-address hardware-type { ethernet | ieee802 } Bind the specified IP address to the client with a specific MAC address. ip-address: Specify the IP address to be bound. hardware-address: Enter the MAC address of the client. ethernet | ieee802: Specify a hardware type for the client, either Ethernet or IEEE802. show ip dhcp server manual-binding Verify the manual binding configuration. end Return to Privileged EXEC Mode. copy running-config startup-config Save the settings in the configuration file. The following example shows how to bind the IP address 192.168.1.33 in pool1 (on the subnet of 192.168.1.0) to the host with the MAC address 74:D4:68:22:3F:34: Switch#config Switch(config)#ip dhcp server pool pool1 Switch(dhcp-config)#address 192.168.1.33 hardware-address 74:d4:68:22:3f:34 hardware-type ethernet Switch(dhcp-config)#show ip dhcp server manual-binding Pool Name Client Id/Hardware Address IP Address Hardware Type Bind Mode ------- --------- ----------- -------- pool1 74:d4:68:22:3f:34 192.168.1.33 Ethernet MAC Address Switch(dhcp-config)#end Configuration Guide 551