TP-Link T2600G-18TSTL-SG3216 T2600G-18TSUN V1 Configuration Guide - Page 59

Managing System System Info Configurations Recurring Mode If you select Recurring Mode, specify a cycle time range for the Daylight Saving Time of the switch. This configuration will be used every year. Offset: Specify the time to set the clock forward by. Start Time: Specify the start time of Daylight Saving Time. The interval between start time and end time should be more than 1 day and less than 1 year(365 days). End Time: Specify the end time of Daylight Saving Time. The interval between start time and end time should be more than 1 day and less than 1 year (365 days). Date Mode If you select Date Mode, specify an absolute time range for the Daylight Saving Time of the switch. This configuration will be used only one time. Offset: Specify the time to set the clock forward by. Start Time: Specify the start time of Daylight Saving Time. The interval between start time and end time should be more than 1 day and less than 1 year(365 days). End Time: Specify the end time of Daylight Saving Time. The interval between start time and end time should be more than 1 day and less than 1 year (365 days). 3) Click Apply. 2.1.5 Specifying the Serial Port Parameter Choose the menu System > System Info > Serial Port Setting to load the following page. Figure 2-7 Specifying the Serial Port Parameter In the Serial Port Settings section, specify the Baud Rate and click Apply. Baud Rate Configure the baud rate of the console connection. The default value is 38400 bps. Date Bits Displays the data bits. Parity Bits Displays the parity bits. Stop Bits Displays the stop bits. Configuration Guide 29