TP-Link T2600G-18TSTL-SG3216 T2600G-18TSUN V1 Configuration Guide - Page 760

Configuring Network Security IP-MAC Binding Configurations Switch(config)#show ip source binding U No. Host IP-Addr MAC-Addr VID Port ACL -- --- -------- 1 1 host1 192.168.0.55 aa:bb:cc:dd:ee:ff 10 Gi1/0/5 ARP-D Switch(config)#end Switch#copy running-config startup-config Col. ----- 2.2.2 Viewing Binding Entries On privileged EXEC mode or any other configuration mode, you can use the following command to view binding entries: show ip source binding View the information of binding entries, including the host name, IP address, MAC address, VLAN ID, port number, protect type and collision status. There are two types of collision status: Warning and Critical. Warning: The collision entries have the same IP address and MAC address, and all the collision entries are valid. This kind of collision may be caused by the MSTP function. Critical: The collision entries have the same IP address but different MAC addresses. For the collision entries learned from the same source, only the newly added entry will be valid. For the collision entries learned different sources, only the entry with the highest priority will be valid. The priority of different entry types, from high to low, is Manually, ARP Scanning and DHCP Snooping. Configuration Guide 730