TP-Link T2600G-18TSTL-SG3216 T2600G-18TSUN V1 Configuration Guide - Page 574

Configuring DHCP DHCP Server Configuration Choose the menu Routing > DHCP Server > Manual Binding to load the following page. Figure 2-3 Manual Binding Follow these steps to configure Manual Binding: 1) In the Manual Binding section, select a pool name and enter the IP address to be bound. Select a binding mode and finish the configuration accordingly. Pool Name Select a DHCP server pool from the drop-down list. IP Address Enter the IP address to be bound to the host. Binding Mode Select a binding mode: Client Id: Bind the IP address to the client ID. Client Id in ASCii: Bind the IP address to the client ID in ASCII format. Hardware Address: Bind the IP address to the MAC address of the client. Client Id If you select Client ID as the binding mode, enter the client ID in this field. Hardware Address If you select Hardware Address as the binding mode, enter the MAC address in this field. Hardware Type 2) Click Create. If you select Hardware Address as the binding mode, select a hardware type. The hardware type includes Ethernet and IEEE802. Configuration Guide 544