TP-Link T2600G-18TSTL-SG3216 T2600G-18TSUN V1 Configuration Guide - Page 86

Managing System System Tools Configurations Step 2 reboot Reboot the switch. 4.2.7 Configuring the Reboot Schedule Follow these steps and choose one type to configure the reboot schedule: Step 1 Step 2 configure Enter global configuration mode. Use the following command to set the interval to reboot: reboot-schedule in interval [ save_before_reboot ] (Optional) Specify the reboot schedule. interval: Specify a period of time. The switch will reboot after this period. The valid values are from 1 to 43200 minutes. save_before_reboot: Save the configuration file before the switch reboots. Use the following command to set the time and date to reboot: reboot-schedule at time [ date ] [ save_before_reboot ] (Optional) Specify the reboot schedule. time: Specify the time for the switch to reboot, in the format of HH:MM. date: Specify the date for the switch to reboot, in the format of DD/MM/YYYY. The date should be within 30 days. save_before_reboot: Save the configuration file before the switch reboots. If no date is specified, the switch reboots according to the time you have set. If the time you set is later than the time that this command is executed, the switch will reboot later the same day; otherwise the switch will reboot the next day. Step 3 end Return to privileged EXEC mode. Step 4 copy running-config startup-config Save the settings in the configuration file. The following example shows how to set the switch to reboot at 12:00 on 15/01/2016. Switch#configure Switch(config)#reboot-schedule at 12:00 15/01/2016 save_before_reboot Reboot system at 15/01/2016 12:00. Continue? (Y/N): Y Reboot Schedule Settings Reboot schedule at 2016-01-15 12:00 (in 17007 minutes) Configuration Guide 56