TP-Link T2600G-18TSTL-SG3216 T2600G-18TSUN V1 Configuration Guide - Page 795

Configuring Network Security DoS Defend Configuration SYN sPort less 1024 Blat Attack Ping Flooding SYN/SYN-ACK Flooding WinNuke Attack 3) Click Apply. The attacker sends the illegal packet with its TCP SYN field set to 1 and source port smaller than 1024. The attacker sends the illegal packet with the same source port and destination port on Layer 4 and with its URG field set to 1. Similar to the Land Attack, the system performance of the attacked host is reduced because the Host circularly attempts to build a connection with the attacker. The attacker floods the destination system with Ping packets, creating a broadcast storm that makes it impossible for the system to respond to legal communication. The attacker uses a fake IP address to send TCP request packets to the server. Upon receiving the request packets, the server responds with SYN-ACK packets. Since the IP address is fake, no response will be returned. The server will keep on sending SYN-ACK packets. If the attacker sends overflowing fake request packets, the network resource will be occupied maliciously and the requests of the legal clients will be denied. Because the Operation System with bugs cannot correctly process the URG (Urgent Pointer) of TCP packets, the attacker sends this type of packets to the TCP port139 (NetBIOS) of the host with the Operation System bugs, which will cause the host with a blue screen. 9.2 Using the CLI Follow these steps to configure DoS Defend: Step 1 configure Enter global configuration mode. Step 2 ip dos-prevent Globally enable the DoS defend feature. Configuration Guide 765