TP-Link T2600G-18TSTL-SG3216 T2600G-18TSUN V1 Configuration Guide - Page 90

Managing System Access Security Configurations 5.1.2 Configuring the HTTP Function Choose the menu System > Access Security > HTTP Config to load the following page. Figure 5-2 Configuring the HTTP Function 1) In the Global Control section, Select Enable and click Apply to enable the HTTP function. HTTP HTTP function is based on the HTTP protocol. It allows users to manage the switch through a web browser. 2) In the Session Config section, specify the Session Timeout and click Apply. Session Timeout The system will log out automatically if users do nothing within the Session Timeout time. 3) In the Access User Number section, select Enable and specify the parameters. Number Control Select Enable to control the number of the users logging on to the web management page at the same time. The total number of users should be no more than 16. Admin Number Specify the maximum number of users whose access level is Admin. Guest Number Specify the maximum number of users whose access level is Operator, Power User or User. Note: For T2600-18TS, the number of Operator, Power User and User can be set respectively. 4) Click Apply. Configuration Guide 60