TP-Link T2600G-18TSTL-SG3216 T2600G-18TSUN V1 Configuration Guide - Page 974

Configuring SNMP & RMON RMON Configurations Interval Set the sample interval from 10 to 3600 seconds; the default is 1800 seconds. Every history entry has its own timer. For the monitored port, the switch collects packet information and generates a record in every interval. Max Buckets Set the maximum number of records for the history entry. When the number of records exceeds the limit, the earliest record will be overwritten. The ranges are from 10 to 130; the default is 50. 3) Enter the owner name, and set the status of the entry. Click Apply. Owner Enter the owner name of the entry with 1 to 16 characters. By default, it is monitor. Status Enable or disable the entry. By default, it is disabled. Enable: The entry is enabled. Disable: The entry is disabled. 5.1.3 Configuring Event Choose the menu SNMP > RMON > Event to load the following page. Figure 5-3 Event Table Follow these steps to configure event: 1) Choose an event entry, and set the SNMP User of the entry. Index Displays the index of event entries. There are 12 event entries all together. User Enter the SNMP user name or community name of the entry. The name should be what you have set in SNMP previously. By default, it is public. 2) Set the description and type of the event. Configuration Guide 944