Toshiba 8000 Tecra 8000 Users Guide - Page 47
Selecting video cables, Connecting to the composite video out port
UPC - 032017021280
View all Toshiba 8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Using Your Computer in the Office Using external display devices 23 Selecting video cables To connect a device to the composite video out port, you'll need an RCA cable. For the best video quality, always use a properly shielded cable. HINT: Toshiba recommends using a cable no longer than 20 feet (approximately six meters). Using a poor quality cable may result in a dull or fuzzy picture, poor color, ghosting, video noise, or loss of video. Connecting to the composite video out port To connect the device: 1 Turn off the computer. 2 Connect one end of the RCA cable to the external video device. Refer to the documentation provided with the device for the location of its video in port. Connecting the RCA cable to the composite video out port 3 Connect the other end of the RCA cable to the composite video out port on the back of the computer. 4 Turn on the external video device. Part I: Getting to Know Your Computer