Uniden BCD996P2 English Manual - Page 10

Location-Based Scanning - Using an optional GPS unit you can scan your systems based on a set range from your current location. GPS (Location-Based) Alerts - Notifies you when you are near an area you have programmed as a dangerous road, dangerous intersection, or a general point of interest. Analog and Digital AGC - Helps automatically balance the volume level between different radio systems. Adaptive Digital Threshold - Automatically sets the digital decode threshold for APCO 25 systems. Preprogrammed Systems - Your scanner is preprogrammed with several conventional and digital agencies covering police, fire, and ambulance. Search with Scan Operation - Lets you include and/or assign quick keys to selected service/ custom search ranges during scan operation. 100 Quick Keys - You can scan conventional systems/trunked sites, groups, and searches by assigning them to quick keys. 3 Search Keys - You can assign 3 of the number keys to start a search range, Tone-Out search, or view the 'Band Scope' mode. Temporary Lockout - Automatically unlock temporarily locked out channels/systems/searches/ locations when you cycle power. CTCSS/DCS/NAC Tone Decode - Decodes and displays Continuous Tone Code Squelch System tones being transmitted and plays Digital Coded Squelch and NAC being received. CTCSS/DCS/NAC Search - Lets you search for CTCSS, DCS, or NAC tones when it finds an active frequency in search and close call modes. Close Call RF Capture Technology - Lets you set the scanner so it detects and provides information about nearby radio transmissions. Close Call 'Do-not-Disturb' checks for Close Call activity in between channel reception so active channels are not interrupted. Close Call Temporary Store - Temporarily stores and scans the last 10 Close Call hits in the 'Hits with Scan' system. Fire Tone-Out Standby/Tone Search - Lets you set the scanner to alert you if a two-tone sequential page is transmitted. You can set up to 10 settings (transmit frequency, tone frequencies) then select one for standby monitoring. The scanner will also search and display unknown tones. Frequency/ID Auto Search and Store - The scanner can be set to automatically store all active frequencies from a service or limit search in a conventional system you select or automatically store all new talkgroup IDs into a trunked system you select. Custom Alerts - You can program your scanner to alert you when, a channel is received, you receive a Close Call hit, a talkgroup ID is transmitted with an emergency alert, you get close to a POI (Point of Interest)/Dangerous Road/Dangerous Crossing, or you receive a Tone-Out hit. For each alert in the scanner, you can select from 9 different tone patterns, 15 volume settings, 7 colors, and 2 color patterns. Repeater Reverse - Allows the scanner to try to switch to the repeater input when monitoring a channel on a repeater system. Broadcast Screen - Allows the scanner to ignore hits on known broadcast frequencies including pager frequencies in search and Close Call modes. You can also program up to 10 custom frequency ranges that the scanner will ignore. Text Tagging - You can name each system, site, group, channel, talkgroup ID, custom search range, location, Tone-Out, and SAME group, using up to 16 characters per name. 6