Uniden BCD996P2 English Manual - Page 55

For Standard Motorola 800 MHz rebanded systems, Band Plan, Lower Base, Upper Base, Offset, Polarity

Get Uniden BCD996P2 PDF manuals and user guides View all Uniden BCD996P2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 55 highlights

6. Scroll to 'Set Offset' and press E/ . 7. At 'Input Offset' enter the offset and press E/ . 8. At 'Select Polarity' scroll to + or - and press E/ . 9. Scroll to 'Set Spacing' and press E/ . 10. Scroll to the step size and press E/ . 11. Press MENU to return and repeat for each band plan as needed. 12. Press MENU to return. For Standard Motorola 800 MHz rebanded systems you need to set Band Plan 1 and Band Plan 2 as follows: Band Plan 1 2 Lower Base Freq 851.025 851.0125 Upper Base Freq 854.000 868.9875 Offset 440 0 Polarity + + Spacing 25 kHz 25 kHz Set Site Type (EDACS only) this is where you select a Wideband or Narrowband EDACS site. 1. Scroll to 'Set Site Type' and press E/ . 2. Scroll to 'Wide (Standard)' or 'Narrow' and press E/ to save and exit. Note: EDACS Wide is the same as EDACS Standard and use a 9600 baud control channel. EDACS Narrow-band sites use a 4800 baud control channel. Set Frequencies this is where you program or change the trunking frequencies, delete frequencies, or lock them out. 1. To Program New Frequencies, scroll to 'Set Frequencies' and press E/ . 2. At 'Set Frequency' scroll to 'New Frequency' and press E/ . 3. At 'Input Frequency' enter the frequency and press E/ . For EDACS and LTR sites only: 1. At 'Input LCN' enter the LCN number and press E/ . 2. Scroll to 'New Frequency' and press E/ to enter more frequencies. 3. Press MENU twice to return to the 'Edit Site' menu. To Edit Frequencies: 1. Scroll to 'Set Frequencies' and press E/ . 2. At 'Set Frequency' scroll to the frequency you want to edit and press E/ . 3. Scroll to' Edit Frequency' press E/ . Edit the frequency and press E/ to save and exit. For EDACS and LTR sites only: 1. At 'Input LCN' enter the LCN number and press E/ . 2. Scroll to 'Set Lockout' press E/ . 3. Set the lockout status and press E/ to save and exit E/ to save and exit. 4. Scroll to' Delete Frequency' press E/ . At 'Confirm Delete' press E/ . 5. You will return to the 'Edit Site' menu. 6. Press MENU twice to return to the site menu. 51

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
51
6.
Scroll to ‘Set Offset’ and press
E/
.
7.
At ‘Input Offset’ enter the offset and press
E/
.
8.
At ‘Select Polarity’ scroll to + or - and press
E/
.
9.
Scroll to ‘Set Spacing’ and press
E/
.
10.
Scroll to the step size and press
E/
.
11.
Press
MENU
to return and repeat for each band plan as needed.
12.
Press
MENU
to return.
For Standard Motorola 800 MHz rebanded systems
you need to set Band Plan 1 and Band
Plan 2 as follows:
Band Plan
Lower Base
Freq
Upper Base
Freq
Offset
Polarity
Spacing
1
851.025
854.000
440
+
25 kHz
2
851.0125
868.9875
0
+
25 kHz
Set Site Type (EDACS only)
this is where you select a Wideband or Narrowband EDACS site.
1.
Scroll to ‘Set Site Type’ and press
E/
°
2.
Scroll to ‘Wide (Standard)’ or ‘Narrow’ and press
E/
to save and exit.
Note: EDACS Wide is the same as EDACS Standard and use a 9600 baud control channel.
EDACS Narrow-band sites use a 4800 baud control channel.
Set Frequencies
this is where you program or change the trunking frequencies, delete
frequencies, or lock them out.
1.
To Program New Frequencies, scroll to ‘Set Frequencies’ and press
E/
°
2.
At ‘Set Frequency’ scroll to ‘New Frequency’ and press
E/
.
3.
At ‘Input Frequency’ enter the frequency and press
E/
.
For EDACS and LTR sites only:
1.
At ‘Input LCN’ enter the LCN number and press
E/
.
2.
Scroll to ‘New Frequency’ and press
E/
to enter more frequencies.
3.
Press
MENU
twice to return to the ‘Edit Site’ menu.
To Edit Frequencies:
1.
Scroll to ‘Set Frequencies’ and press
E/
.
2.
At ‘Set Frequency’ scroll to the frequency you want to edit and press
E/
.
3.
Scroll to’ Edit Frequency’ press
E/
. Edit the frequency and press
E/
to save and exit.
For EDACS and LTR sites only:
1.
At ‘Input LCN’ enter the LCN number and press
E/
.
2.
Scroll to ‘Set Lockout’ press
E/
.
3.
Set the lockout status and press
E/
to save and exit
E/
to save and exit.
4.
Scroll to’ Delete Frequency’ press
E/
. At ‘Confirm Delete’ press
E/
.
5.
You will return to the ‘Edit Site’ menu.
6.
Press
MENU
twice to return to the site menu.