Uniden BCD996P2 English Manual - Page 72

Using Startup Keys

Get Uniden BCD996P2 PDF manuals and user guides View all Uniden BCD996P2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 72 highlights

Set Priority sets the priority mode. You can also toggle these modes by pressing PRI in scan mode. 1. Scroll to 1 of 3 options and press E/ . Off - the priority feature is off. On - the scanner checks conventional priority channels, and priority IDs within systems that have priority ID enabled. PRI - appears in the display when you select this mode. Plus On - the scanner only scans the conventional priority channels. PRI - flashes in the display when you select this mode. Set Internval sets how often the scanner will check the priority channels. 1. Scroll to 'Set Interval' and press E/ . 2. Enter the number of seconds (1-10) and press E/ to save and exit. MaxCHs/PRI-Scan sets the maximum priority channel numbers that are scanned during one priority scan interrupt. If there are more priority channels than the value you select, the channels are divided into more than one group and the scanner scans each group in turn. For example, if you set the maximum channels to 20 and there are 100 priority channels, the scanner checks those 100 channels in groups of 20 and takes a total of 5 intervals to complete the priority scan. 1. Scroll to 'MaxCHs/PRI-Scan' and press E/ . 2. Enter the number of number of channels to check (1-100) and press E/ to save and exit. USING STARTUP KEYS You can program each of your Systems with a Startup Key (0-9) so that when you power up the scanner and press the key number at the same time, just those Favorites List(s) assigned to the key will be enabled for scan. Systems are not affected. To Use a Startup Key: 1. Turn the scanner off. 2. Press & hold the number key that corresponds to the startup key when you turn the scanner on. 3. Continue holding the number key until the scanner display shows the number of the startup key configuration. When you use startup configuration, the scanner checks all systems, sites, and search ranges and: • All systems, sites, or search ranges that do not have a startup key assigned will be scanned the way they were when you last turned off the scanner. • All systems, sites, or search ranges that have a the startup key assigned to the one you pressed will be unlocked. • All systems, sites, or search ranges that have a different startup key assigned will be locked out. • The scanner will remember the last startup configuration you used when you power up the scanner using just the power key. Caution: If you press the wrong key when you press the power key to set your startup configuration, and that wrong key doesn't have any systems assigned to that key, you will startup your scanner with all systems locked out. 68

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
68
Set Priority
sets the priority mode. You can also toggle these modes by pressing
PRI
in scan
mode.
1.
Scroll to 1 of 3 options and press
E/
.
Off
- the priority feature is off.
On
- the scanner checks conventional priority channels, and priority IDs within systems
that have priority ID enabled.
PRI
- appears in the display when you select this mode.
Plus On
- the scanner only scans the conventional priority channels.
PRI
- flashes in the display when you select this mode.
Set Internval
sets how often the scanner will check the priority channels.
1.
Scroll to ‘Set Interval’ and press
E/
.
2.
Enter the number of seconds (1-10) and press
E/
to save and exit.
MaxCHs/PRI-Scan
sets the maximum priority channel numbers that are scanned during one
priority scan interrupt. If there are more priority channels than the value you select, the channels
are divided into more than one group and the scanner scans each group in turn. For example,
if you set the maximum channels to 20 and there are 100 priority channels, the scanner checks
those 100 channels in groups of 20 and takes a total of 5 intervals to complete the priority scan.
1.
Scroll to ‘MaxCHs/PRI-Scan’ and press
E/
.
2.
Enter the number of number of channels to check (1-100) and press
E/
to save and exit.
USING STARTUP KEYS
You can program each of your Systems with a Startup Key (0-9) so that when you power up the
scanner and press the key number at the same time, just those Favorites List(s) assigned to the
key will be enabled for scan. Systems are not affected.
To Use a Startup Key:
1.
Turn the scanner off.
2.
Press & hold the number key that corresponds to the startup key when you turn the scanner
on.
3.
Continue holding the number key until the scanner display shows the number of the startup
key configuration.
When you use startup configuration, the scanner checks all systems, sites, and search ranges
and:
•
All systems, sites, or search ranges that do not have a startup key assigned will be scanned
the way they were when you last turned off the scanner.
•
All systems, sites, or search ranges that have a the startup key assigned to the one you
pressed will be unlocked.
•
All systems, sites, or search ranges that have a different startup key assigned will be locked
out.
•
The scanner will remember the last startup configuration you used when you power up the
scanner using just the power key.
Caution:
If you press the wrong key when you press the power key to set your startup
configuration, and that wrong key doesn’t have any systems assigned to that key, you will startup
your scanner with all systems locked out.