2010 Jeep Liberty Owner's Manual - Page 144
2010 Jeep Liberty Manual
Page 144 highlights
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 1. Turn the ignition ON. 3. Press and release the SET button on the memory switch, then press the side of the rocker switch labeled (2) 2. Adjust all memory profile settings to desired preferwithin five seconds. The EVIC, if equipped, will display ences (i.e., seat, side mirror and radio station presets). which memory position is being set. 3. Press and release the SET button on the memory NOTE: switch, then press the side of the rocker switch labeled (1) • For vehicles equipped with an automatic transmission, within five seconds. The Electronic Vehicle Information memory profiles can be set without the vehicle in Center (EVIC), if equipped, will display which memory PARK, but the vehicle must be in PARK to recall a position is being set. memory profile. If desired, a second memory profile can be stored into • For vehicles equipped with a manual transmission, the memory as follows: vehicle speed must be at 0 mph (0 km/h) to recall a memory profile. 1. Turn the ignition ON. 2. Adjust all memory profile settings to desired prefer- • The Recall Memory with Remote Key Unlock feature can be turned on and off through the EVIC, if ences (i.e., seat, side mirror and radio station presets). equipped. Refer to "Electronic Vehicle Information Center (EVIC)/Customer-Programmable Features" in "Understanding Your Instrument Panel" for further information. 3