2010 Jeep Liberty Owner's Manual - Page 146

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145 To recall the memory settings for driver one, press The distance the driver seat moves depends on where MEMORY button number 1 or the UNLOCK button on you have the driver seat positioned when you remove the key from the ignition switch. the RKE transmitter linked to memory position 1. To recall the memory setting for driver two, press • When you remove the key from the ignition switch, the driver seat will move about 2.4 in (60 mm) MEMORY button number 2 or the UNLOCK button on rearward if the driver's seat position is greater than or the RKE transmitter linked to memory position 2. equal to 2.7 in (68 mm) forward of the rear stop. The A recall can be cancelled by pressing any of the seat will return to its previously set position when you MEMORY buttons (S, 1, or 2) during a recall. When a insert the key into the ignition switch and turn it out of recall is cancelled, the driver seat will stop moving. A the LOCK position. delay of one second will occur before another recall can • When you remove the key from the ignition switch, be selected. the driver seat will move to a position 0.3 in (8 mm) Easy Entry/Exit Seat forward of the rear stop if the driver's seat position is (Available with Memory Seat Only) between 0.9 in and 2.7 in (23 mm and 68 mm) forward This feature provides automatic driver seat positioning to of the rear stop. The seat will return to its previously enhance driver mobility when entering and exiting the set position when you insert the key into the ignition vehicle. switch and turn it out of the LOCK position. 3