2010 Jeep Liberty Owner's Manual - Page 145
2010 Jeep Liberty Manual
Page 145 highlights
144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Linking and Unlinking the Remote Keyless Entry Transmitter to Memory Your Remote Keyless Entry (RKE) transmitters can be programmed to recall one of two pre-programmed memory profiles with a press of the UNLOCK button on the RKE transmitter. NOTE: Your RKE transmitters can be unlinked to the memory setting by pressing the SET button followed by the UNLOCK button on the RKE transmitter in Step 4 above. Memory Position Recall NOTE: To program your RKE transmitters, perform the follow• For vehicles equipped with an automatic transmission, ing: the vehicle must be in PARK to recall memory positions. If a recall is attempted when the vehicle is not in 1. Remove the key from the ignition. PARK, a message will display in the EVIC, if 2. Select the desired memory profile 1 or 2. equipped. 3. Press and release the SET button on the memory • For vehicles equipped with a manual transmission, the switch, then within five seconds press and release the vehicle speed must be at 0 mph (0 km/h) to recall side of the rocker switch labeled 1 or 2 accordingly. memory positions. If a recall is attempted with the Memory Profile Set" (1 or 2) will display in the EVIC, if vehicle speed above 0 mph (0 km/h), a message will equipped. display in the EVIC, if equipped. 4. Press and release the LOCK button on the RKE transmitter within 10 seconds.