2010 Jeep Liberty Owner's Manual - Page 218
2010 Jeep Liberty Manual
Page 218 highlights
UNDERSTANDING YOUR INSTRUMENT PANEL 217 sound will stop when the ESP becomes inactive following 22. Engine Temperature Warning Light a maneuver that caused the ESP activation. This light warns of an overheated engine condition. As temperatures rise and the gauge apWARNING! proaches H, this indicator will illuminate and a single chime will sound after reaching a set threshold. If a warning light remains on the system may not be Further overheating will cause the temperature gauge to working and you will not have the benefit of ESP or pass H, the indicator will continuously flash and a BAS. Under certain driving conditions, where ESP or continuous chime will occur until the engine is allowed BAS would be beneficial, you - if you have not to cool. adjusted your driving speeds and stopping in or to If the light turns on while driving, safely pull over and account for the lack of the feature, may be in accistop the vehicle. If the A/C system is on, turn it off. Also, dent. shift the transmission into NEUTRAL and idle the ve21. SERV (Service) 4WD Indicator Light - If Equipped hicle. If the temperature reading does not return to The "SERV 4WD Indicator Light" will turn on normal, turn the engine off immediately and call for when the ignition key is turned to the ON service. Refer to "If Your Engine Overheats" in "What To position and it will stay on for two seconds. If Do In Emergencies" for further information. the light stays on or turns on during driving, it means that the 4WD system is not functioning properly and that service is required. 4