2010 Jeep Liberty Owner's Manual - Page 306

STARTING AND OPERATING 305 STARTING PROCEDURES Turn the ignition switch to the START position and Before starting your vehicle, adjust your seat, adjust both release when the engine starts. If the engine fails to start inside and outside mirrors, and fasten your seat belts. within 10 seconds, turn the ignition switch to the LOCK position, wait 10 to 15 seconds, then repeat the "Normal WARNING! Starting" procedure. Tip Start Feature Turn the ignition switch to START position and release it as soon as the starter engages. The starter motor will continue to run, but will automatically disengage itself Start the engine with the shift lever in the NEUTRAL or when the engine is running. If the engine fails to start, the PARK position. Apply the brake before shifting to any starter will disengage automatically in 10 seconds. If this occurs, turn the ignition switch to the LOCK position, driving range. wait 10 to 15 seconds, then repeat the "Normal Starting" Normal Starting procedure. NOTE: Normal starting of either a cold or a warm engine is obtained without pumping or pressing the accelerator pedal. Do not leave children or animals inside parked vehicles in hot weather. Interior heat build-up may cause serious injury or death. 5