2010 Jeep Liberty Owner's Manual - Page 160

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159 the end of the windshield wiper/washer control lever to • Use of Rain-X or products containing wax or silicone one of the five intermittent wiper settings to activate this may reduce rain sensor performance. feature. • The rain-sensing feature can be turned on and off through the Electronic Vehicle Information Center The sensitivity of the system is adjustable from the (EVIC) - if equipped. Refer to "Electronic Vehicle windshield wiper/washer control lever. Wiper delay Information Center (EVIC)/Personal Settings (Cusposition 1 is the least sensitive and wiper delay position tomer-Programmable Features)" in "Understanding 5 is the most sensitive. Choose position 3 for normal rain Your Instrument Panel" for further information. conditions. Choose position 2 or 1 if you desire less wiper sensitivity. Choose position 4 or 5 if you desire more The rain-sensing system has protective features for the sensitivity. Place the lever in the off position when not wiper blades and arms. It will not operate under the using the system. following conditions: NOTE: • Low Temperature Wipe Inhibit - The rain-sensing • The rain-sensing feature will not operate when the feature will not operate when the ignition is first wiper speed is in the low or high position. switched ON, the vehicle is stationary, and the outside • The rain-sensing feature may not function properly temperature is below 32° F (0° C). If the wiper control when ice or dried salt water is present on the windis moved, the vehicle speed becomes greater than shield. 3