2010 Jeep Liberty Owner's Manual - Page 230

UNDERSTANDING YOUR INSTRUMENT PANEL 229 Unless reset, this message will continue to display each time you turn the ignition switch to the ON position. To turn off the message temporarily, press and release the MENU button. To reset the oil change indicator system (after performing the scheduled maintenance) perform the following procedure: Trip Functions Press and release the MENU button until one of the following Trip Functions displays in the EVIC: • Average Fuel Economy • Distance To Empty 1. Turn the ignition switch to the ON position. Do not • Elapsed Time start the engine. • Display Units of Measure in 2. Fully depress the accelerator pedal slowly three times Press the SCROLL button to cycle through all the Trip within 10 seconds. Computer functions. 3. Turn the ignition switch to the LOCK position. The Trip Functions mode displays the following informaNOTE: If the indicator message illuminates when you tion: start the vehicle, the oil change indicator system did not • Average Fuel Economy reset. If necessary, repeat this procedure. Shows the average fuel economy since the last reset. When the fuel economy is reset, the display will read "RESET" or show dashes for two seconds. Then, the 4