2010 Jeep Liberty Owner's Manual - Page 469

468 MAINTAINING YOUR VEHICLE LIGHT BULBS - Exterior Bulb No. Headlamp ...9008 H13 Front Park/Turn Signal Lamp...3757AK Front Side Marker Lamp ...168 Back-Up Lamp ...3157K Center High Mounted Stop Lamp (CHMSL) ...LED (serviced at an authorized dealer) Fog Lamp...H10 9145 License Plate Lamp ...168 Rear Tail/Stop...3157K Rear Turn Signal Lamp ...3757AK BULB REPLACEMENT Headlamp 1. Open the hood. 2. Reach behind the headlamp housing to access the headlamp bulb lock ring. 3. Firmly grasp the lock ring and rotate it counterclockwise to unlock it. 4. Remove the bulb and connector assembly from the headlamp housing. 5. Disconnect the bulb from the electrical connector and then connect the replacement bulb. CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with any oily surface, clean the bulb with rubbing alcohol. 6. Install the bulb and connector assembly into the headlamp housing and rotate the lock ring clockwise to lock it in place. 7. Close the hood.