2010 Jeep Liberty Owner's Manual - Page 22
2010 Jeep Liberty Manual
Page 22 highlights
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 For vehicles not equipped with the EVIC, perform the Illuminated Approach - If Equipped This feature activates the headlights for up to 90 seconds following steps: when the doors are unlocked with the RKE transmitter. 1. Press and hold the LOCK button on a programmed The time for this feature is programmable on vehicles (i.e., functional) RKE transmitter for at least 4 seconds, equipped with the Electronic Vehicle Information Center but no longer than 10 seconds. Then, press and hold the (EVIC). Refer to "Electronic Vehicle Information Center UNLOCK button while still holding the LOCK button. (EVIC)/Personal Settings (Customer-Programmable Features)" in "Understanding Your Instrument Panel" for 2. Release both buttons at the same time. further information. 3. Test the feature from outside the vehicle by pressing the LOCK and UNLOCK buttons on the RKE transmitter. To Lock the Doors and Liftgate Press and release the LOCK button on the RKE transmit4. Repeat these steps if you want to return this feature to ter to lock all doors and the liftgate. The turn signal lights its previous setting. will flash and the horn will chirp to acknowledge the lock NOTE: Pressing the LOCK button on the RKE transmit- signal. ter while you are inside the vehicle will activate the Security Alarm. Opening a door with the Security Alarm activated will cause the alarm to sound. Press the UNLOCK button to deactivate the Security Alarm. 2