2010 Jeep Liberty Owner's Manual - Page 238

UNDERSTANDING YOUR INSTRUMENT PANEL 237 your selection, press and release the FUNCTION SE- button. Refer to "Rear Park Assist System" in "UnderLECT button until "Off," "45 sec.," "5 min.," or "10 min." standing The Features Of Your Vehicle" for system function and operating information. appears. Illumination Approach When this feature is selected, the headlights will activate and remain on for up to 90 seconds when the doors are unlocked with the RKE transmitter. To make your selection, press and hold the RESET button until "Off," "30 sec," "60 sec," or "90 sec" appears. Enable/Disable the Rear Park Assist System The Rear Park Assist system will scan for objects behind the vehicle when the transmission is in the REVERSE and the vehicle speed is less than 11 mph (18 km/h). The system can be enabled with Sound Only, Sound and Display, or turned OFF through the EVIC, to make your selection, press and release the FUNCTION SELECT Hill Start Assist (HSA) - If Equipped When on is selected, the HSA system is active. Refer to "Electronic Brake Control System" in "Starting And Operating" for system function and operating information. To make your selection, press and release the FUNCTION SELECT button until "On" or "Off" appears. Display Fuel Saver - If Equipped The "ECO" message is located in the Compass/ Temperature display, this message can be turned on or off. To make your selection, press and release the FUNCTION SELECT button until "ON" or "OFF" appears. 4