2010 Jeep Liberty Owner's Manual - Page 25

24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE During the PANIC Mode, the door locks and Remote Keyless Entry (RKE) system will function normally. NOTE: The PANIC and Security Alarms are quite PANIC mode will not disarm the Security System on different. Please take a moment to activate the PANIC vehicles so equipped. and the Security modes to hear the differences in the horn. In case one should go off in the future, you will NOTE: You may need to be close to the vehicle when need to know which mode has been activated in order to using the RKE transmitter to turn off the PANIC Alarm due to the radio frequency noises emitted by the system. deactivate it. Using the PANIC Alarm To turn the PANIC Alarm feature ON or OFF, press and hold the PANIC button on the RKE transmitter for at least one second and release. When the PANIC Alarm is on, the headlights and turn signal lights will flash, the horn will pulse on and off, and the illuminated entry system will turn on. Programming Additional Transmitters Refer to Sentry Key "Customer Key Programming." If you do not have a programmed RKE transmitter, contact your authorized dealer for details. Battery Replacement The recommended replacement battery is CR2032. The PANIC Alarm will stay on for three minutes unless you turn it off by pressing the PANIC button a second NOTE: time or if the vehicle speed is 5 mph (8 km/h) or greater. • Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate.