2010 Jeep Liberty Owner's Manual - Page 325

324 STARTING AND OPERATING 4WD Auto Shift Positions The transfer case switch is located on the center console Four-Wheel Drive Auto High Range - This active onnext to the shift lever. demand range makes available optimum traction for a wide range of conditions, while maximizing driver convenience. This position is always in four-wheel drive mode, with a normal 42% front axle, 58% rear axle torque split. The system also anticipates and prevents slip by redirecting torque as necessary, up to 100% to the front or rear axle, if needed. 4WD Low Four-Wheel Drive Low Range - This range is for low speed four-wheel drive. Locks the front driveshaft and rear driveshaft together forcing the front and rear wheels to rotate at the same speed. Additional traction and maximum pulling power for loose or slippery road surfaces only. Do not exceed 25 mph (40 km/h). Transfer Case Switch 2WD Rear Wheel Drive High Range - This range is for normal street and highway driving on dry hard-surfaced roads.