2010 Jeep Liberty Owner's Manual - Page 189

188 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Using Operator Mode Press the switch rearward and hold it, the Sky Slider™ will open from the front and move toward the rear of the vehicle. Press the switch forward and hold it, the Sky Slider™ will open from the rear and move toward the front of the If the Sky Slider™ is open from the rear, press the switch vehicle. rearward and hold it and the Sky Slider™ will move rearward. Release the switch to stop the Sky Slider™ NOTE: During operation, any movement of the Sky travel at any point. Slider™ switch will stop the Sky Slider™ roof. Manual Override Closing the Sky Slider™ The Sky Slider™ drive motors are mounted to the roof above the cargo lamp. In the event that your vehicle Using Automatic Mode Press and release the button in the center of the switch losses battery power, you can close the Sky Slider™ by and the Sky Slider™ will close automatically from any turning the drive gears in the appropriate motor with a position. 6 mm Allen wrench. To do so, you must first remove the cargo lamp from the headliner. Then, insert the wrench into the "Allen" shaped hole in the appropriate motor and turn the wrench clockwise until the top closes Using Operator Mode If the Sky Slider™ is open from the front, press the switch forward and hold it, the Sky Slider™ will move forward. Release the switch to stop the Sky Slider™ travel at any point.