2010 Jeep Liberty Owner's Manual - Page 409
2010 Jeep Liberty Manual
Page 409 highlights
408 STARTING AND OPERATING 13. Turn the ignition switch to the unlocked OFF posi- Flashing NEUTRAL position indicator light indicates that shift requirements have not been met. tion. 14. Shift the transmission into PARK. 15. Attach the vehicle to a tow vehicle with a tow bar. 16. Release the parking brake. CAUTION! Damage to the transmission may occur if the transmission is shifted into PARK with the transfer case in NEUTRAL and the engine RUNNING. With the transfer case in NEUTRAL, ensure that the engine is OFF prior to shifting the transmission into PARK. NOTE: Steps 1 through 5 are requirements for shifting the transfer case. If these requirements are not met prior to depressing the NEUTRAL selection button or while the shift attempt is in process, then the NEUTRAL Shifting Out of NEUTRAL indicator light will flash continuously until all requirePerform the following procedure to prepare your vehicle ments are met or until the NEUTRAL button is released. for normal usage: The ignition switch must be in the ON position for a shift 1. Bring the vehicle to a complete stop. to take place and for the position indicator lights to be operable. If the ignition switch is not in the ON position, 2. Place the ignition switch in the LOCK position (if it the shift will not take place and no position indicator has been moved or the engine has been started). lights will be on or flashing.