2010 Jeep Liberty Owner's Manual - Page 296

UNDERSTANDING YOUR INSTRUMENT PANEL 295 • Air Conditioner Control Press this button to turn on the air conditioning during manual operation only. When the air conditioning is turned on, cool dehumidified air will flow through the outlets selected with the Mode control dial. Press this button a second time to turn OFF the air conditioning. An LED in the button illuminates when manual compressor operation is selected. dust, or high humidity are present. Activating recirculation will cause the LED in the control button to illuminate. After ten minutes, the system will return to normal AUTO mode function and the LED will turn off. NOTE: • When the ignition switch is turned to the LOCK position, the recirculation feature will be cancelled. • In cold weather, use of the Recirculation mode may lead to excessive window fogging. The Recirculation mode is not allowed in the floor, defrost, or defrost/ • Recirculation Control floor mode in order to improve window clearing. The system will automatically control recircuRecirculation will be disabled automatically if these lation. However, pressing the Recirculation modes are selected. Control button will temporarily put the system in recirculation mode (ten minutes). This can • Extended use of recirculation may cause the windows to fog. If the interior of the windows begins to fog, be used when outside conditions such as smoke, odors, press the Recirculation button to return to outside air. Some temp/humidity conditions will cause captured interior air to condense on windows and hamper 4