2010 Jeep Liberty Owner's Manual - Page 152
2010 Jeep Liberty Manual
Page 152 highlights
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 To activate the delay, turn the ignition switch to the LOCK position while the headlights are still on. Then, turn off the headlights within 45 seconds. The delay interval begins when you turn off the headlights. Only the headlights will illuminate during this time. If you turn the headlights, or parking lights, or ignition NOTE: The Daytime Running Lights will turn off switch ON again, the system will cancel the delay. automatically when a turn signal is in operation and turn If you turn the headlights off before the ignition, they will on again when the turn signal is not operating. turn off in the normal manner. Lights-On Reminder The Headlight delay time is programmable on vehicles If the headlights or parking lights are on after the ignition equipped with the Electronic Vehicle Information Center is turned to the LOCK position, a chime will sound to (EVIC). Refer to "Electronic Vehicle Information Center alert the driver when the driver's door is opened. (EVIC)/Customer-Programmable Features" in "Understanding Your Instrument Panel" for further information. Daytime Running Lights - If Equipped The high beam headlights will turn on as Daytime Running Lights (DRL) and operate at lower intensity whenever the ignition is ON, the engine is running, the headlight switch is off, the parking brake is released and the shift lever is in any position except PARK. 3