2010 Jeep Liberty Owner's Manual - Page 470

MAINTAINING YOUR VEHICLE 469 Front Turn Signal and Front Side Marker Lamp Front Fog Lamp 1. Turn the steering wheel all the way to the right to 1. Open the hood. access the left front turn signal or side marker. Turn the 2. Reach behind the headlamp housing to access the steering wheel all the way to the left to access the right bulb. front turn signal or side marker. 3. Rotate the bulb's socket counterclockwise, and remove 2. Remove three push-pins from the wheel-well liner. the bulb and socket assembly from the fog lamp housing. 3. Gently flex the wheel-well liner forward to access the 4. Pull the bulb out of the socket and insert the replacebulb. ment bulb. 4. Rotate the bulb's socket counterclockwise, and remove CAUTION! the bulb and socket assembly from the housing. 5. Pull the bulb out of the socket and insert the replacement bulb. 6. Install the bulb and socket assembly into the housing, and rotate the socket clockwise to lock it in place. 7. Reposition the wheel-well liner and install the push-pins. Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with any oily surface, clean the bulb with rubbing alcohol. 7