2010 Jeep Liberty Owner's Manual - Page 289

288 UNDERSTANDING YOUR INSTRUMENT PANEL Conditioning (A/C) button is not pressed. This dehuAir is directed through the floor outlets with a midifies the air to help dry the windshield. To improve small amount flowing through the defrost and side fuel economy, use these modes only when necessary. window demist outlets. Recirculation Control Mix Pressing the Recirculation Control button will put the system in recirculation mode. This can Air is directed through the floor, defrost, and side window demist outlets. This setting works best in be used when outside conditions such as smoke, odors, dust, or high humidity are cold or snowy conditions that require extra heat to the windshield. This setting is good for maintaining present. Activating recirculation will cause the LED in the comfort while reducing moisture on the windshield. control button to illuminate. After ten minutes, the system will return to normal mode function and the LED Defrost will turn off. Air is directed through the windshield and side window demist outlets. Use this mode with maxi- NOTE: mum blower and temperature settings for best wind- • Continuous use of the recirculation mode may make the inside air stuffy and window fogging may occur. shield and side window defrosting. Extended use of this mode is not recommended. NOTE: The air conditioning compressor operates in Mix, Defrost, or a blend of these modes, even if the Air • The use of the recirculation mode in cold or damp weather will cause windows to fog on the inside, Floor