2010 Jeep Liberty Owner's Manual - Page 292

UNDERSTANDING YOUR INSTRUMENT PANEL 291 the desired comfort level require air conditioning, the • Pressing the Air Conditioning Control button while in system will automatically make the adjustment. AUTO mode will cause the LED in the control button to flash three times and then turn off. This indicates You will experience the greatest efficiency by simply that the system is in AUTO mode and requesting the allowing the system to function automatically. Selecting air conditioning is not necessary. the "O" (OFF) position on the blower control stops the • If your air conditioning performance seems lower than system completely and closes the outside air intake. expected, check the front of the A/C condenser located The recommended setting for maximum comfort is 72°F in front of the radiator for an accumulation of dirt or (22°C) for the average person; however, this may vary. insects. Clean with a gentle water spray from behind the radiator and through the condenser. Fabric front NOTE: • The temperature setting can be adjusted at anytime fascia protectors may reduce airflow to the condenser, without affecting automatic operation. reducing air conditioning performance. 4