Brother International IntelliFax-3550 Service Manual - Page 124
Higher, Lower, Speaker Volume Switch Position, Selector 5 of WSW30, Medium-High, Medium-Low, WSW30
View all Brother International IntelliFax-3550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
WSW30 (Function setting 8) Selector No. Function 1 Detection level of dial tone or 2 busy tone for the built-in TAD operation 3 4 Not used. 5 Speaker output level 6 Cooling fan control mode 7 8 Not used. Setting and Specifications No. 1 2 3 0 0 0 : -38.0 dBm (A) 0 0 1 : -39.5 dBm (B) 0 1 0 : -41.0 dBm (C) 0 1 1 : -42.5 dBm (D) 1 0 0 : -44.0 dBm (E) 1 0 1 : -45.5 dBm (F) 1 1 0 : -47.0 dBm (G) 1 1 1 : -48.5 dBm (H) 0: Higher No. 6 7 00 : A 01 : B 1x : C 1: Lower q Selectors 1 through 3: Detection level of dial tone or busy tone for built-in TAD operation (For those models equipped with a built-in TAD) If dial tone or busy tone inputted during ICM recording is below the level specified by these selectors, the TAD stops recording and disconnects the line. q Selector 5: Speaker output level (For those models equipped with a built-in TAD) This selector determines the speaker output level when the speaker volume switch is set to HIGH or LOW, as listed below. Selector 5 of WSW30 Speaker Volume Switch Position HIGH LOW 0 (Higher) High Medium-Low 1 (Lower) Medium-High Low V - 42