Brother International IntelliFax-3550 Service Manual - Page 70
with the surface of the PCB and attach it to the interface plate 5 mm inwards from
View all Brother International IntelliFax-3550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
s Reassembling Notes • When reinstalling the main PCB, make sure that the harnesses are routed on the main cover as illustrated in Section 1.23. • For the MFC6550MC/7550MC/7650MC/9500 which has a nickel-hydrogen battery on the main PCB, be sure to remove the battery from the PCB when transporting the PCB. Failure to do so may result in a short circuit, overcurrent flow, and fire. When installing the nickel-hydrogen battery on the main PCB, bring its edge into contact with the surface of the PCB and attach it to the interface plate 5 mm inwards from the plate edge as shown below. • For the MFC4550plus/7650MC, if you replace the main PCB with a new one, be sure to install the update data onto the flash ROM of the new main PCB (refer to Chapter II). Interface plate 5 mm Connector (P14) Nickel-hydrogen battery Bring the battery edge into contact with the PCB. (MFC6550MC/7550MC/7650MC/9500) Main PCB IV - 20