Brother International IntelliFax-3550 Service Manual - Page 130
Sensor Operational Check, sensors are as defined above.
View all Brother International IntelliFax-3550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
MFC6550MC/7550MC/7650MC/9500 MFC 7550MC status status Set Function Clear Hook ABC DEF 123 Hold GH I JKL MNO 4 56 Redial / Pause PQRS TUV W X YZ 789 Speed Dial 0 Voice Fax status Fine Fax Photo S.Fine F/ T Tel-index Resolution Mode SIX IN ONE FAX PRINTER COPIER SCANNER PC FAX MESSAGE CENTER Coverpage Super Q.Scan Help L Speaker H 01 02 03 13 14 15 04 05 06 16 17 18 07 08 09 19 20 21 10 11 12 Shift 22 23 24 On/Off Line Photo FF/Cont Sort Test/ Enlarge/ Reset Reduce Print Priority Copy Record Erase Play Stop Start Key & Button Entry Order (2) 3.8 Sensor Operational Check s Function This function allows you to check whether the eight sensors (document front sensor, document rear sensor, sheet feeder cover sensor, cover sensor, registration sensor, paper ejection sensor, toner sensor, and hook switch sensor) operate normally. The LED shows the "FRRETCCVRGHATNHK" when - the document front sensor detects no paper (FR), - the document rear sensor detects no paper (RE), - the sheet feeder cover is closed (TC), - the top cover is closed (CV), - the registration sensor detects no paper (RG), - the paper ejection sensor detects no paper (HA), - the toner sensor detects toner (TN), and - the hook switch sensor detects the on-hook state (HK). s Operating Procedure (1) Press the 3 and 2 keys in this order in the initial maintenance mode. The LCD should show "FRRETCCVRGHATNHK" if the detecting conditions of the nine sensors are as defined above. (2) Change the detecting conditions (e.g., insert paper through the document sensors or the registration sensor, open the sheet feeder cover or the top cover, jam paper at the paper outlet, remove the toner cartridge, and lift up the handset), and then check that the indication on the LCD changes according to the sensor states. (3) To stop this operation and return the equipment to the initial maintenance mode, press the Stop key. V - 48