Canon 9685A001AA PowerShot G6 Camera User Guide - Page 117

Shooting - Selecting Particular Effects 3 Press the T arrow on the omni selector, then select the number of shots using the W or X arrow on the omni selector. z If you press the W or X arrow on the omni selector continuously, the number of shots increases in units of 5 shots at a time. z The maximum number of shots* is determined according to the CF card's remaining capacity. * In some cases, the actual maximum number of shots may be fewer than the displayed number. 4 Press the SET button z appears on the LCD monitor and panel. appears on the display 5 Press the shutter button. z The first image is shot and the interval shooting session starts. z Once the set number of shots is taken, the camera automatically powers down regardless of the power saving function settings. z If the below operations are accessed while the interval shooting is in process, the interval shooting session will be canceled. • Turning the mode dial or pressing the shutter button halfway while the camera is waiting to shoot the next image • Opening the CF card slot cover or battery cover • Switching to Playback mode • Turning off the power z Once the interval shooting session is started, all operation buttons become inactive. z The lens stays extended until the next image is shot. z Images are not displayed on the LCD monitor right after being shot. z Interval shooting is not available when the date and time are not set. z Continuous Shooting, AEB mode and Focus-BKT mode are not available. The self-timer can only be used for the first shot in the series. 113