Creative 70EM896106000 Owners Manual - Page 19
PCIe Card & Interfaces, The E-MU 1010 PCIe Card, Important, Connections, EDI Connector
UPC - 054651126893
View all Creative 70EM896106000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
3 - PCIe Card & Interfaces 3 - PCIe Card & Interfaces The E-MU 1010 PCIe Card The E-MU 1010 PCIe Card The E-MU 1010 PCIe card is the heart of the system and contains E-MU's powerful E-DSP chip. The powerful hardware DSP on this card leaves more power free on your CPU for additional software plug-ins and other tasks. Important When the MicroDock is connected to the 1010 PCIe card, the digital I/O on the PCIe card is disabled. Use the digital I/O on the MicroDock. Connections (', Connects to MicroDock via EDI Cable S/PDIF In/Out ADAT or S/PDIF Optical In/Out EDI Connector Connects to the MicroDock using the supplied EDI cable. This cable provides a a two-way data link between the E-MU 1010 and the MicroDock as well as supplying power to the MicroDock. S/PDIF Digital Audio Input & Output RCA phono jacks are standard connectors used for S/PDIF (Sony/Philips Digital InterFace) connections. Each jack carries two channels of digital audio. The E-MU 1010 receives digital audio data with word lengths of up to 24-bits. Data is always transmitted at 24-bits. S/PDIF digital I/O can be used for the reception and/ or transmission of digital data from external digital devices such as a DAT external analog-to-digital converter or an external signal processor equipped with digital inputs and outputs. The S/PDIF out can be configured in either Professional or Consumer mode in the Session Settings menu. The 1010 PCIe card can also send and receive AES/EBU digital audio through the use of a cable adapter. See "AES/EBU to S/PDIF Cable Adapter" for details. The S/PDIF input and outputs are usable at the 44.1kHz, 48kHz 88.2kHz and 96kHz sample rates, but are disabled for 176.4kHz and 192kHz. The word clock contained in the input data stream can be used as a word clock source. See "System Settings". S/PDIF and ADAT on the 1010 PCIe card are NOT ACTIVE when the MicroDock is connected. ADAT Optical Digital Input & Output The ADAT optical connectors transmit and receive 8 channels of 24-bit audio using the ADAT type 1 & 2 formats. The word clock contained in the input data stream can be used as a word clock source. See "System Settings". Optical connections have certain advantages such as immunity to electrical interference and ground loops. Make sure to use high quality glass fiber light pipes for connections longer than 1.5 meters. Important: When using any type of digital I/O such as S/PDIF or ADAT, you MUST sample sync the two devices or clicks and pops in the audio will result. E-MU PCIe Digital Audio Systems 19