Creative 70EM896106000 Owners Manual - Page 48

4 - The PatchMix DSP Mixer Mixer Strip Creation Pre or Post Fader Aux Sends When you create a New Mixer Strip you have the option to place both Aux Sends after the channel volume fader and mute control or you can place them before the fader and mute. Post-Fader turns down the send level as you lower the volume of the strip. With Pre-Fader selected, you may still hear the effected signal returning from one of the Aux Buses with the volume fader turned down. With the Pre-Fader box selected, the Aux Send levels are completely unaffected by the Level Fader and Mute settings. The Pre-Fader setting allows you to create two completely different mixes using the Aux Buses since the signal levels of this mix won't be affected by the fader settings. Input Pre-Fader Aux Send Volume Fader & Mute does NOT affect Send Levels Pan Fader Send Amount Amt Aux Bus 1 Amt Send Amount Aux Bus 2 Side Chain Side Chain Return Amount Return Amount Mute In order to change a strip from pre-fader to post-fader or vice-versa, you have to delete the strip and create a new one. Main / Monitor Bus Output Input Pan Post-Fader Aux Send Volume Fader & Mute affects both Aux Send Levels Fader Mute Send Amount Amt Aux Bus 1 Send Amount Amt Aux Bus 2 Side Chain Side Chain Return Amount Return Amount Main / Monitor Bus Output 48 Creative Professional