Dell C3765dnf Color Laser View - Page 149

Fax Defaults Fax Settings Resolution 2 Sided Scanning Binding of Original Darken/Lighten Delayed Send Fax Number Country Fax Header Name Line Type Line Monitor DRPD Pattern Receive Mode Ring Tone Volume Auto Receive Fax Auto Receive Tel/Fax Auto Receive Answer/Fax Junk Fax Setup Sent Fax Forward Forwarding Number 2 Sided Printing Remote Receive Remote Receive Tone Discard Size Redial Attempts Interval of Redial Resend Delay Tone/Pulse Prefix Dial Prefix Dial Number Fax Cover Page Fax Header Displays the resolution level to be used for fax transmission. Displays whether to scan both sides of a document. Displays the binding position for the 2-sided scanning. Displays the density level to be used for fax transmission. Displays the fax transmission start time. Displays the fax number of the printer, which will be printed on the header of faxes. Displays the country where the printer is used. Displays the name of the sender that will be printed on the header of faxes. Displays the line type; PSTN or PBX. Displays the volume of the line monitor, which audibly monitors a transmission through the internal speaker until a connection is made. Displays the Distinctive Ring Pattern Detection (DRPD) setting. Displays the fax receiving mode. Displays the volume of the ring tone, which indicates that an incoming call is a telephone call through the internal speaker when Receive Mode is set to Telephone/Fax. Displays the interval at which the printer goes into the fax receive mode after receiving an incoming call. Displays the interval at which the printer goes into the fax receive mode after the external telephone receives an incoming call. Displays the interval at which the printer goes into the fax mode after the external answering machine receives an incoming call. Displays whether to reject faxes sent from unwanted stations. Displays whether to forward incoming faxes to a specified destination. Displays the fax number of the destination to which incoming faxes are to be forwarded. Displays whether to print on both sides of a sheet of paper. Displays whether to receive faxes by pressing a remote receive code on the external telephone. Displays the 2-digit remote receive code when Remote Receive is On. Displays whether to delete text or images at the bottom of a fax page when the entire page does not fit onto the output paper. Displays the number of redial attempts to make if the destination fax number is busy. Displays the interval between redial attempts. Displays the interval between re-send attempts. Displays whether to use tone or pulse dialing. Displays whether to set a prefix dial number. Displays a prefix dial number. This number dials before any auto dial number is started. It is useful for accessing the Private Automatic Branch Exchange (PABX). Displays whether to attach a cover page to faxes. Displays whether to print the information of the sender on the header of faxes. Dell™ Printer Configuration Web Tool 147