Dell C3765dnf Color Laser View - Page 298
Labels
View all Dell C3765dnf Color Laser manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 298 highlights
• Adjust the guide to fit the width of the envelopes. • To load an envelope into the MPF, insert the envelope with the flaps closed or open and the short-edge of the envelope facing into the printer. The print side must be facing up. • See "Loading an Envelope in the MPF" for instructions on loading an envelope. • Use one envelope size during a print job. • Ensure that the humidity is low because high humidity (more than 60 %) and the high printing temperatures may seal the envelopes. • For best performance, do not use envelopes that: - Have excessive curl or twist - Are stuck together or damaged in any way - Contain windows, holes, perforations, cutouts, or embossing - Use metal clasps, string ties, or metal folding bars - Have an interlocking design - Have postage stamps attached - Have any exposed adhesive when the flap is in the sealed or closed position - Have nicked edges or bent corners - Have rough, cockle, or laid finishes Labels Your printer can print on many labels designed only for use with laser printers. When selecting labels: • Label adhesives, face sheet (printable stock), and topcoats must be able to withstand temperatures of 205 °C (401 °F) and pressure of 25 pounds per square inch (psi). • Use labels that can be without sealing, excessive curling, wrinkling, or releasing hazardous emissions. • Do not use label sheets with a slick backing material. CAUTION: Before buying large quantities of any print media, it is recommended that you try a sample first. When printing on labels: • Use labels that can withstand temperatures of 205 °C (401 °F) without sealing, excessive curling, wrinkling, or releasing hazardous emissions. • Set the paper type to Label from the printer driver. • Load labels in the MPF. Tray1 and the optional 550-sheet feeder do not support labels. • Do not load labels together with paper in the MPF. • Do not print within 1 mm (0.04 inches) of the die-cut. • Do not print within 1 mm (0.04 inches) of the edge of the label, of the perforations, or between die-cuts of the label. • Do not print a label through the printer more than once. • Portrait orientation is preferred, especially when printing bar codes. • Do not use labels that have exposed adhesive. • Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a jam. 296 Print Media Guidelines