Dell C3765dnf Color Laser View - Page 249

Values: Print Always Print On Error Print Disable* Prints a protocol monitor report after every fax transmission. Prints the protocol monitor report only when an error occurs. Does not print the protocol monitor report. System Settings Use System Settings to configure the power saving mode, warning tones, time-out duration, display language, and job log auto print settings. NOTE: Values marked by an asterisk (*) are the factory default menu settings. General Purpose: To configure general settings for the printer. Power Saver Timer Purpose: To specify the time for transition to power saver mode. Values: Sleep Deep Sleep 3 minutes* Available Range: 1-60 minutes 5 minutes* Available Range: 1-60 minutes Specifies the time taken by the printer to enter Sleep mode after it finishes a job. Specifies the time taken by the printer to enter Deep Sleep mode after it has entered Sleep mode. When you specify 1 minute for Sleep, the printer enters power saver mode 1 minute after it finishes a job. This uses much less energy, but requires more warm-up time for the printer. Specify 1 minute if your printer shares an electrical circuit with room lighting and you notice lights flickering. Select a high value if your printer is in constant use. In most circumstances, this keeps the printer ready to operate with minimum warm-up time. Select a value between 1 and 60 minutes for power saver mode if you want a balance between energy consumption and a shorter warm-up period. The printer automatically returns to the standby mode from the power saver mode when it receives data from the computer or remote fax machine. You can also change the status of the printer to the standby mode by pressing any button on the operator panel. Date & Time Purpose: To specify the date and time formats. Values: Time Zone Date Format Sets the time zone. Sets the date depending on the Format settings. Sets the date format. Understanding the Printer Menus 247